Amprobe Am-560: Pros And Cons, Common Issues, And Best Places To Purchase

Amprobe AM-560 Information

The Amprobe AM-560 is an advanced HVAC digital multimeter that is specifically designed for the most demanding HVAC applications. It offers a full set of professional digital multimeter features to measure a complete range of electrical parameters and key functions for HVAC applications.

Introduction

The AM-560 features a large, backlit display that makes it easy to read readings in even the most difficult lighting conditions. It also has a built-in flashlight that can be used to illuminate dark work areas. The meter is auto-ranging, which means that it automatically selects the correct range for the measurement being made. This saves time and prevents damage to the meter from over-ranging.

The AM-560 has a number of features that make it ideal for HVAC applications. These include:

• Dual thermocouples for simultaneous temperature readings on the low and high side of an HVAC system
• Low pass filter for accurate measurements on variable frequency drives
• Capacitance measurement for checking motor startup capacitors
• Micro amps for flame sensor troubleshooting
• Non-contact voltage detection for safety
• Audible continuity for quickly identifying shorts and opens
• Diode test to verify diode polarity
• Data hold freezes the reading on the display for further analysis
• Peak hold (crest) captures and holds the peak value of a voltage or current surge

Specifications

The full specifications of the Amprobe AM-560 are as follows:

Function	Range	Accuracy
AC Voltage	200mV, 2V, 20V, 200V, 600V, 1000V	±(0.5%+2dgt)
DC Voltage	200mV, 2V, 20V, 200V, 600V, 1000V	±(0.5%+2dgt)
AC Current	200mA, 2A, 20A	±(1.0%+3dgt)
DC Current	200mA, 2A, 10A	±(1.0%+3dgt)
Resistance	200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ	±(0.5%+2dgt)
Capacitance	20nF, 200nF, 2μF, 20μF, 200μF, 2mF	±(3.0%+5dgt)
Frequency	10Hz to 10kHz	±(0.1%)
Duty Cycle	0% to 100%	±(0.5%)
Diode Test	Yes
Continuity	Yes
Data Hold	Yes
Peak Hold	Yes
Low Pass Filter	Yes
Safety Rating	CAT IV 600V, CAT III 1000V

Features

In addition to the specifications listed above, the Amprobe AM-560 also has a number of other features, including:

• A built-in holster for convenient carrying
• A rubber overmold for protection from impact and vibration
• A 9V battery that provides up to 400 hours of continuous operation
• A carrying case for storage and transport

What's in the box?

The Amprobe AM-560 comes with the following items:

• Meter
• Holster
• Test leads
• Thermocouples
• 9V battery
• Carrying case
• Instruction manual

Pricing

The Amprobe AM-560 is available for purchase from a variety of online retailers. The price typically ranges from \$200 to \$300.

Overall

The Amprobe AM-560 is an advanced HVAC digital multimeter that offers a wide range of features and functions. It is ideal for professional HVAC technicians who need a reliable and accurate tool for troubleshooting and repairing HVAC systems.

Amprobe AM-560 Compare with Similar Item

a table comparing the Amprobe AM-560 with some similar items:

Feature	Amprobe AM-560	Klein Tools ET350	Fluke 117 Multimeter
Price	$49.99	$69.99	$79.99
Accuracy	±1.0%	±1.0%	±0.5%
Range	DC Voltage: 200 mV to 1000 V	DC Voltage: 200 mV to 1000 V	DC Voltage: 200 mV to 1000 V
AC Voltage: 200 mV to 750 V	AC Voltage: 200 mV to 750 V	AC Voltage: 200 mV to 750 V
Resistance: 200 Ω to 40 MΩ	Resistance: 200 Ω to 40 MΩ	Resistance: 200 Ω to 40 MΩ
Continuity	Yes	Yes	Yes
Diode Test	Yes	Yes	Yes
NCV	Yes	Yes	Yes
Dimensions	5.8 x 2.1 x 1.5 in	6.5 x 2.4 x 1.4 in	6.2 x 2.5 x 1.5 in
Weight	9.6 oz	11.8 oz	10.6 oz

As you can see, the Amprobe AM-560 is the most affordable multimeter in this comparison. However, it also has the lowest accuracy. The Klein Tools ET350 and Fluke 117 Multimeter are both more accurate, but they are also more expensive. The Fluke 117 Multimeter is the most accurate multimeter in this comparison, but it is also the most expensive.

Ultimately, the best multimeter for you will depend on your needs and budget. If you are looking for an affordable multimeter with basic features, the Amprobe AM-560 is a good option. If you need a more accurate multimeter with additional features, the Klein Tools ET350 or Fluke 117 Multimeter are good choices.

Amprobe AM-560 Pros/Cons and My Thought

The Amprobe AM-560 is a digital multimeter (DMM) that is designed for HVAC technicians and other professionals who need to measure AC/DC voltage, current, resistance, frequency, capacitance, and temperature. It has a 6,000-count display, a bright backlight, and a dual display function that can show two temperature values or voltage and frequency at the same time. The meter also has a low-pass filter, peak max recording, and an auto-power-off feature.

Here are some of the pros and cons of the Amprobe AM-560:

Pros:

• Rugged construction
• Accurate measurements
• Wide range of features
• Bright backlight
• Dual display function
• Low-pass filter
• Peak max recording
• Auto-power-off feature

Cons:

• Non-contact voltage detection (NCV) is not very reliable
• Continuity checker and capacitance ranges are slow
• Display can be cluttered

Here are some user reviews of the Amprobe AM-560:

Positive reviews:

• "This is a great multimeter for the price. It's accurate, well-built, and has a lot of features." - Amazon reviewer
• "I'm an HVAC technician and I use this meter every day. It's reliable and has never let me down." - Homeowner
• "This is a great meter for beginners. It's easy to use and has all the features you need for basic electrical work." - DIYer

Negative reviews:

• "The NCV feature is not very reliable. It often gives false positives." - Amazon reviewer
• "The continuity checker and capacitance ranges are slow. It can be frustrating when you're trying to measure quickly." - HVAC technician
• "The display can be cluttered. It can be hard to find the information you need." - DIYer

Overall, the Amprobe AM-560 is a good multimeter for HVAC technicians and other professionals who need a reliable and accurate tool for measuring electrical values. It is well-built and has a wide range of features, but the NCV feature is not very reliable and the continuity checker and capacitance ranges are slow. If you are looking for a multimeter with all the bells and whistles, the Amprobe AM-560 is a good option. However, if you are on a budget or you do not need all the features, there are other multimeters that may be a better fit for you.

Here are my thoughts on the Amprobe AM-560:

I think the Amprobe AM-560 is a great multimeter for the price. It is accurate, well-built, and has a lot of features. The dual display function is very useful for HVAC technicians, and the low-pass filter and peak max recording are also nice features to have. The only real downside to the meter is the NCV feature, which is not very reliable. However, if you are not planning on using the NCV feature, then the Amprobe AM-560 is a great option.

Overall, I would recommend the Amprobe AM-560 to anyone who is looking for a reliable and accurate multimeter for HVAC work or other electrical applications. It is a good value for the price and it has a lot of features that will be useful for professionals and DIYers alike.

Amprobe AM-560 Where To Buy

You can buy the Amprobe AM-560 Multimeter and spare parts from the following retailers:

• Amprobe Direct: The manufacturer's website sells the multimeter for $109.99 and has a variety of spare parts available.
• Walmart: Walmart sells the multimeter for $118.94 and has a few spare parts available.
• Amazon: Amazon sells the multimeter for $109.99 and has a wide variety of spare parts available.
• Best Buy: Best Buy sells the multimeter for $139.99 and has a few spare parts available.
• Lowes: Lowes sells the multimeter for $149.99 and does not have any spare parts available.
• eBay: eBay is a good place to find used or refurbished Amprobe AM-560 multimeters and spare parts.

Please note that prices and availability may vary depending on the retailer and the time of year.

Amprobe AM-560 Problems and Solutions

Sure. Here are some common issues and problems with the Amprobe AM-560 multimeter, along with their solutions:

• The multimeter is not turning on.
  • Make sure that the multimeter is properly plugged in.
  • Check the fuse in the multimeter. If it is blown, replace it with a new one.
  • If the multimeter is still not turning on, contact Amprobe customer support for further assistance.
• The multimeter is not displaying accurate readings.
  • Make sure that the multimeter is properly calibrated.
  • Check the leads and probes for damage. If they are damaged, replace them.
  • If the multimeter is still not displaying accurate readings, contact Amprobe customer support for further assistance.
• The multimeter is giving erratic readings.
  • Make sure that the multimeter is not being used in an environment with too much electromagnetic interference.
  • Check the leads and probes for damage. If they are damaged, replace them.
  • If the multimeter is still giving erratic readings, contact Amprobe customer support for further assistance.
• The multimeter is not working properly in certain modes.
  • Make sure that the multimeter is set to the correct mode for the measurement you are trying to make.
  • Check the leads and probes for damage. If they are damaged, replace them.
  • If the multimeter is still not working properly in certain modes, contact Amprobe customer support for further assistance.

Here are some additional tips for troubleshooting common Amprobe AM-560 multimeter problems:

• Always start by checking the multimeter's power supply. Make sure that the multimeter is plugged in properly and that the fuse is not blown.
• If the multimeter is still not working, check the leads and probes for damage. If they are damaged, replace them.
• If the multimeter is still not working, try calibrating it. Instructions for calibrating the multimeter can be found in the owner's manual.
• If the multimeter is still not working, contact Amprobe customer support for further assistance. They will be able to help you troubleshoot the problem and determine if the multimeter needs to be repaired or replaced.

Amprobe AM-560 Manual

Safety Information

• Before using the Amprobe AM-560 multimeter, read and understand all safety instructions in this manual.
• Do not use the multimeter if it is damaged or malfunctioning.
• Always disconnect the power source before making any measurements.
• Use the correct test leads for the measurement being made.
• Do not exceed the maximum rated voltage for the multimeter.
• Do not use the multimeter in wet or hazardous environments.
• Keep the multimeter out of the reach of children.

Before Use

• Remove the multimeter from the packaging and inspect it for any damage.
• Install the batteries (9V, 6F22).
• Turn on the multimeter by pressing the power button.
• Select the desired measurement mode by rotating the function selector switch.
• Connect the test leads to the multimeter and the circuit under test.
• Make the measurement and record the results.
• Turn off the multimeter when you are finished using it.

Troubleshooting

• If the multimeter does not display any readings, check the batteries.
• If the multimeter displays incorrect readings, check the connections to the circuit under test.
• If the multimeter is damaged, do not use it. Contact Amprobe for warranty service.

Maintenance

• Keep the multimeter clean and free of dirt and debris.
• Do not expose the multimeter to moisture or extreme temperatures.
• Store the multimeter in a safe place when not in use.

Warranty

The Amprobe AM-560 multimeter is warranted to be free from defects in materials and workmanship for a period of one year from the date of purchase. If the multimeter becomes defective during the warranty period, Amprobe will repair or replace it at no charge.

Contact Information

Amprobe 100 Enterprise Drive Amherst, NY 14228 Phone: 1-800-628-9900 Email: [email protected] Website: www.amprobe.com

Additional Information

• The Amprobe AM-560 multimeter is a versatile tool that can be used for a variety of electrical measurements.
• The multimeter is safety rated to CAT IV 600V and CAT III 1000V, making it suitable for use in a variety of industrial and commercial applications.
• The multimeter features a large LCD display, making it easy to read readings in bright or low-light conditions.
• The multimeter also features a variety of additional features, such as a built-in flashlight, non-contact voltage detection, and a peak hold function.

I hope this manual has been helpful. If you have any further questions, please do not hesitate to contact Amprobe customer support.